When you are satisfied with your image, you are ready to cut!

Select your image. If you have multiple images, you can right click and drag over the images. Or you can select edit from the top menu and click select all.
Select the cut/plot icon and then send to cutter.

A cut preview window with settings will appear.

Cut settings for VinylMaster Pro

Settings:

Select Model: TITAN3 -53in (Servo) ARMS or TITAN3 -24in (Servo) ARMS, depending on which station you are at.

Media Width: adjust to 24.00in or smaller if you are using a scrap piece.

Job Name: This only matters if you wish to save the cut file for later use.

Rotate: Will turn the image 90 degrees.

Mirror: This can be selected to mirror an image to use for heat transfer vinyl.

Advance after plot: This function moves the vinyl 1/4 inch past the blade once a cut is complete. This is not very helpful for us since we would need it to advance at least a few inches to easily cut it away from the roll.

Absolute Position: Selecting this will move the image to the position it is in on the mat in the editor window. This is useful for registering layers of full-sheet graphics. It will not change the relative distance between the designs. Two images placed an inch apart from each other will still be an inch apart from each other despite their position on the mat changing. If left unchecked, the software will cut your image at the most efficient position possible, the bottom right corner. Selecting this lets you know precisely where the stickers will be cut on your vinyl.

Registration Marks: Marks will be cut in a specific position around your job so you can line up multiple stickers. This could be used to line up layered stickers.

Auto Speed-Weed: A box will be cut around each element, and a line will be generated down the middle of the text for letters. This will help you weed faster.

Auto Weed-Box: A box will be cut around all images to help you weed faster.

**Pro Tip**
	On the mat, make sure individual letters of a text block are grouped together and slightly separated from other graphics, or the Auto Speed Weed function will not put a line down the middle of the negative space between the letters.

Select cut now.

The vinyl spooler window with settings will appear.

Select cut now when you are ready to cut. This will start the cutting immediately on the vinyl cutter.

63%